|
Reflectix (Bulk Rolls)
What is Reflectix Insulation?
Reflectix is a 5/16" thick, seven layer, reflective insulation which is available in rolls of various widths and lengths. It is used extensively in both specialty and standard construction projects. Two outer layers of aluminum foil reflect 97% of radiant heat. Each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulation bubbles resist conductive heat flow, while a center layer of polyethylene gives Reflectix high reliability and strength.
Applications:
- Crawl Spaces: Heat normally escaping downwards in winter is reflected back up, lowering house heating costs and increasing comfort by keeping floors warm.
- Attics: A great deal of heat comes in and escapes through the roof; Reflectix helps regulate house temperatures to keep your house comfortable all year. Reflectix is shown to reduce heat gain through the ceiling by about 40 percent.
- Side Walls: Reflectix can be used in conjunction with mass insulation and rigid board to give a superior system R-value of R-19.56 while meeting building codes and keeping framing costs down.
- Basement Walls: retards vapor, resists fungus and mold, and controls dew point problems.
- Radiant Floors: Reflectix is a perfect choice for insulating below radiant floor heaters. The aluminum foil reflects 97% of the heat energy that strikes it.
- Ducts and Pipes: Heating costs can be greatly reduced by wrapping ducts and pipes with Reflectix to virtually eliminate unnecessary heat loss.
Reflectix has an extensive bank of testing for fire safety, vapor transmission, mold and mildew resistance, emittance and smoke density, along with a full line of physical properties tests. Reflectix products and applications have been evaluated by an impressive and ever growing list of agencies including:
- Building Officials and Code Administrators
- International Conference of Building Officials
- Southern Building Code Congress International
- Canadian Construction Materials Centre
- The State of California
- The State of Wisconsin
- The State of Minnesota
Testing result resources available on the Reflectix Inc. Website
Reflectix Concrete Insulation Technical Data
| Part Number |
Size |
Weight Lbs/Roll |
Square Ft. |
| Double-Bubble Regular Edge | | RX-BP16125 | 16" x 125' |
11.00 |
166.66 |
| RX-BP16250 | 16" x 250' |
22.00 |
333.32 |
| RX-BP24125 | 24" x 125' |
16.50 |
250.00 |
| RX-BP24250 | 24" x 250' |
33.00 |
500.00 |
| RX-BP36125 | 36" x 125' |
24.75 |
375.00 |
| RX-BP36250 | 36" x 250' |
49.50 |
750.00 |
| RX-BP48125 | 48" x 125' |
33.00 |
500.00 |
| RX-BP48250 | 48" x 250' |
66.00 |
1000.00 |
| Double Bubble Under Concrete | | RX-DBW48125 | 48" x 125' |
33.00 |
500.00 |
| RX-DBWEF48125 | 48" x 125' |
33.00 |
500.00 |
| Single Bubble | | RX-SBW48625 | 48" x 62.5' |
10.00 |
250.00 |
| RX-SB48125 | 48" x 125' |
20.00 |
500.00 |
| RX-SB48625 | 48" x 62.5' |
10.00 |
250.00 |
| RX-SB48025 | 48" x 25' |
4.00 |
100.00 |
| Staple Tab | | RX-ST16125 | 16" x 125' |
11.00 |
166.66 |
| RX-ST16250 | 16" x 250' |
22.00 |
333.32 |
| RX-ST24125 | 24" x 125' |
16.50 |
250.00 |
| RX-ST24250 | 24" x 250' |
33.00 |
500.00 |
| RX-ST48125 | 48" x 125' |
33.00 |
500.00 |
| RX-ST48250 | 48" x 250' |
66.00 |
1000.00 |
Reflectix (Consumer Rolls)
| Part Number |
Size |
Weight Lbs/Roll |
Square Ft. |
| 16" Double-Bubble Regular Edge | | RX-BP16025 | 16" x 25' |
2.20 |
33.33 |
| RX-BP16050 | 16" x 50' |
4.40 |
66.66 |
| 16" Staple Tab | | RX-ST16025 | 16" x 25' |
2.20 |
33.33 |
| RX-ST16050 | 16" x 50' |
4.40 |
66.66 |
| 24" Double-Bubble Regular Edge | | RX-BP24010 | 24" x 10' |
1.32 |
20.00 |
| RX-BP24025 | 24" x 25' |
3.30 |
50.00 |
| RX-BP24050 | 24" x 50' |
6.60 |
100.00 |
| 24" Staple Tab | | RX-ST24025 | 24" x 25' |
3.30 |
50.00 |
| RX-ST24050 | 24" x 50' |
6.60 |
100.00 |
| 36" Double-Bubble Regular Edge | | RX-BP36025 | 36" x 25' |
4.95 |
75.00 |
| RX-BP36050 | 36" x 50' |
9.90 |
150.00 |
| 48" Double-Bubble Regular Edge | | RX-BP48010 | 48" x 10' |
2.64 |
40.00 |
| RX-BP48025 | 48" x 25' |
6.60 |
100.00 |
| RX-BP48050 | 48" x 50' |
13.20 |
200.00 |
| 48" Staple Tab | | RX-ST48025 | 48" x 25' |
6.60 |
100.00 |
| RX-ST48050 | 48" x 50' |
13.20 |
200.00 |
Reflectix (Miscellaneous)
| Part Number |
Size/Description |
| RX-DW12025 | Duct Wrap (12" x 25') 4/Case |
| RX-SPW06025 | Spiral Pipe Wrap (6" x 25') 8/Case |
| RX-SPW04025 | Spiral Pipe Wrap (4" x 25') 12/Case |
| RX-SPW02025 | Spiral Pipe Wrap (2" x 25') 6/Case |
| RX-FT210 | Foil Tape (2" x 30') 24/Case |
| RX-FT250 | Foil Tape (2" x 150') 24/Case |
| RX-FT350 | Foil Tape (3" x 150') 16/Case |
| RX-WPT35524 | White Vinyl Tape (3" x 165') 24/Case |
| SE-55501 | Supertape 555 Rubber Resin 3/4" x 100' 10/Case |
| RX-WHK1 | Water Heater Kit Domestic |
| RX-SR24058 | Windshield Solar Reflector (24" x 58") 16/Case |
| RX-SR24062 | Windshield Solar Reflector (24" x 62") 16/Case |
| RX-SP22066 | Sports Buddy (22" x 66") 12/Case |
| RX-RB480625 | Radiant Barrier (48" x 62.5') |
| RX-RB48125 | Radiant Barrier (48" x 125') |
Reflectix Expansion Joint
This durable, lightweight closed-cell foam expansion joint is the solution for your concrete placement needs. Stiff enough to use on straight joints, flexible enough to shape to contours.
Additional Features and Benefits:
- Quality - Exceeds ASTM Standards D-4819 & D-3575
- Lightweight - Approximately 10 times lighter than traditional products
- Sturdy - Will not prematurely break during job site handling
- Resistant to Moisture - Virtually zero water absorption
- Termite Resistant - Does not facilitate destructive termites
- UV Resistant - Prevents early degradation from the sun.
- Recyclable - Foam is made of recyclable resins
- Temperature Friendly - Material is CFC and HCFC-free
- Reusable - Tear-off strip can be reused as a backer rod
- Sealant Friendly - Works with a variety of common sealants
Installation Instructions:
- Unroll and cut to length.
- Attach to adjacent material before pouring concrete. Attachment can be made with construction adhesive, nails or staples. Be sure that the top of the Expansion Joint is at the top of the intended concrete pour.
- Expansion Joint material includes a built-in "tear-off" strip. Place tear-off strip facing up if caulking is desired after concrete hardens. Put tear-off strip facing down if no caulking is planned.
- Pour concrete and finish. After concrete hardens, if tear-off strip was placed up, remove strip and seal area with appropriate caulking.
| Part Number |
Size |
Case Qty |
| RX-EXP04050 | 4" x 50' x 1/2" |
10 |
UltraTouch Cotton Batt Insulation
About UltraTouch:
UltraTouch Natural Cotton Fiber insulation is the successful combination of
25 years of insulation experience and a revolutionary patented manufacturing process that has created a superior and safe product.
UltraTouch:
- Provides for extremely effective sound absorption and maximum thermal performance.
- Contains 85% post-industrial high quality recycled natural fibers.
- Contains no chemical irritants and requires no warning labels unlike traditional products.
- Does not itch and is very easy to handle and work with!
- Is safe for you and the environment; there are no volatile organic compounds concerns when using it.
- Is ASTM Tested Class A fire rated.
- Provides complete and safe mold/mildew protection.
- Requires a minimal amount of energy to manufacture compared to other types of traditional insulation; this helps reduce pollution.
National Building Code: UltraTouch Letter of Compliance
UltraTouch LEED Information
UltraTouch Material and Safety Data Sheet
UltraTouch Specifications
View our Distributor Map, or see additional information on the BondedLogic Website.
| Part Number |
Description |
R-Value |
Square Ft. |
Weight |
| BL-01316 | 3.5" x 16" x 94" |
13 |
106.07 |
39 lbs |
| BL-01324 | 3.5" x 24" x 94" |
13 |
126.63 |
47 lbs |
| BL-02116 | 5.5" x 16" x 94" |
21 |
53.04 |
38 lbs |
| BL-02124 | 5.5" x 24" x 94" |
21 |
63.32 |
45 lbs |
| BL-03016 | 8" x 16" x 48" |
30 |
52.40 |
48 lbs |
| BL-03024 | 8" x 24" x 48" |
30 |
64.64 |
60 lbs |
| BL-INK1 | Insulation Knife |
|
|
|
|
|
