Reflectix Expansion Joint

This durable, lightweight closed-cell foam expansion joint is the solution for your concrete placement needs. Stiff enough to use on straight joints, flexible enough to shape to contours.

Additional Features and Benefits:

• Quality - Exceeds ASTM Standards D-4819 & D-3575
• Lightweight - Approximately 10 times lighter than traditional products
• Sturdy - Will not prematurely break during job site handling
• Resistant to Moisture - Virtually zero water absorption
• Termite Resistant - Does not facilitate destructive termites
• UV Resistant - Prevents early degradation from the sun.
• Recyclable - Foam is made of recyclable resins
• Temperature Friendly - Material is CFC and HCFC-free
• Reusable - Tear-off strip can be reused as a backer rod
• Sealant Friendly - Works with a variety of common sealants

Installation Instructions:

1. Unroll and cut to length.
2. Attach to adjacent material before pouring concrete. Attachment can be made with construction adhesive, nails or staples. Be sure that the top of the Expansion Joint is at the top of the intended concrete pour.
3. Expansion Joint material includes a built-in "tear-off" strip. Place tear-off strip facing up if caulking is desired after concrete hardens. Put tear-off strip facing down if no caulking is planned.
4. Pour concrete and finish. After concrete hardens, if tear-off strip was placed up, remove strip and seal area with appropriate caulking.

Part Number	Size	Case Qty
RX-EXP04050	4" x 50' x 1/2"	10